Electropolished tubing in long continuous coils:

• Fewer Welds
• Quicker Installation
• On-Time Delivery
• Easy Validation with On-Line MTRs
• World-Class Quality Assurance
• 1/8", 1/4", 3/8", and 1/2" Seamless Tubing
• Reduced Start-Up Dry-Down Time
• Jumper and Purge Lines

Cardinal Electropolished Coil is constructed from seamless 316L stainless steel for excellent corrosion resistance and good weldability. All Electropolished Coil is marked for traceability and easily validated with our on-line MTRs.Cardinal’s unyielding commitment to quality is evident in every step of our manufacturing process. Electropolished Coil is inspected by Cardinal’s highly trained inspectors, and produced in accordance with an ISO 9001:2000 registered quality management system. All Electropolished Coil is inspected, cleaned, packaged in a class 10 cleanroom, and always delivered on-time to you.Electropolished coil is also available in dual containment configurations up to 100' maximum.

Specifications:

• Electropolished to 10 µin / 0.25 µm Ra.
• 316L SS tubing meets ASTM specifications for consistent physical, dimensional and chemical composition.
• Controlled sulfur content to insure consistent weldability and reduced non-metallic inclusions.
• Final cleaning and packaging performed in a Class 10 (ISO Class 4) cleanroom.
• 0.1 µ filtered 60°C DI water rinse.
• 0.005 µ filtered 120°C Nitrogen dried.
• Used in ultra high purity gas, chemical distribution, and WFI systems.
• Mill Test Reports available on line at www.cardinaluhp.com
• Certificate of Conformance.
  

  Maximum Lengths:
  1/8" OD x 0.020" wall 100'
  1/4" OD x 0.035" wall 300'
  3/8" OD x 0.035" wall 300'
  1/2" OD x 0.049" wall 300'
  Dual Containment 100'

  6mm, 8mm, 10mm and 12mm diameter tubing is available on request.

• 20µin / 0.50µm Ra ID
• Seamless 316L SS meets ASTM specifications for
  consistent physical, dimensional and chemical composition.
• Controlled sulfur content to insure consistent weldability and reduced on-metalic inclusions.
• Coils are single bagged and packaged to prevent damage during shipment.
• Mill Test Reports available on line at www.cardinaluhp.com
• Certificate of Conformance
• NHO3 passivated
  

  Maximum Lengths:
  1/4" OD x 0.035" wall 980' (300M)
  3/8" OD x 0.035" wall 650' (200M)
  1/2" OD x 0.049" wall 330' (100M)

  6mm, 8mm, 10mm and 12mm diameter tubing is available on request.