TECH 10CR

Long continuous coils of low Ra non-electropolished seamless 316L SS tubing. Used for long runs of analyzer sample lines, O2 piping (CFOS), medical gas distribution and vent lines where intermediate welding and joints can be eliminated.
  • Average surface roughness of 25µin and 32µin Ra maximum.
  • Controlled sulfur for consistent weldability.
  • Cleaned to ASTM G93-96 Level A.
  • Exceeds CFOS CGA G4.1 cleaning.
  • Fully passivated with nitric acid.
  • Coil is rinsed with DI water, purged with filtered nitrogen, capped and double bagged in heat sealed polyethylene.
  • Final cleaning and bagging in ISO Class 7 cleanroom.
  • Brochure +